|
For orders, please call 1-888-693-9162 or email sales@sepems.com
| Alaris Medsystem III |
 |
Rate range: 0.1 – 999 ml/hr.
Volume range: 0.1 – 9999 ml
KVO range: 0.1 – 20.0 ml/hr.
Accuracy: ±5 %
Battery: 6 hours with all channels running at 125 ml/hr.
Three channel pump weighing only 5 lbs |
| |
| Baxter AS40a |
 |
Rate parameters: 0.001 - 360 ml/hr, syringe-dependent (see chart below)
Syringe sizes: BD 1, 3, 5, 10, 20, 30, 60 ml.
Monoject 1, 3, 6, 12, 20, 35, 60 ml.
Terumo 1, 3, 5, 10, 20, 30, 60
Volume limit: Full syringe can be delivered
Battery capacity: 12 hours of operation at 2 ml/hr using 60 ml syringe,
following a 16-hour charge
Bottom LCD- Total volume delivered
Accuracy: ± 3 %, not including syringe tolerance
|
| |
| MTP Pump |
 |
An extremely durable single channel pump that is used by the
military. Its compact and rugged design makes it a top choice for
medical transportation.
|
| |
| Baxter 6201 |
 |
Flow Rate: 1-99.9 ml/hr in 0.1 ml/hr or 1-1,999 ml/hr in 1 ml Increments
Battery 12 Volt-Running Time 6 Hrs Typical-8hrs To Reach 80% Recharge
Alerts: Stopped, Kvo, Insert Slide Clamp, New Rate, Pri Rate=0, Battery Lowsec Complete, Sec Program, Sec Rate, Sec Vtbi=0, Flow Rate, Check Vtbi, Pgm Deliv Enter Pgm, Pgm Deliv Clear All, Pmg Deliv Review Pgm, Ramp Pdp Enter Data, Ramp Pdp Rates High, Resume Pdp, Com Timeout, Ext.Comm Error
Antifree Flow Protection - Standard Staight Baxter Set
Alarm Messages: Check Set Loading, Air, Occlusion, Insert Slide Clamp, Upstream Occlusion, Door Open, Battery Low, Failure, Com Timeout
KVO rate: 5ml/hr - Rate is programmable Power: 120 AC |
| |
| Baxter 6300 |
 |
Dual Pump Version Of The Baxter 6200
Baxter Straight Line Sets
Power Requirements: 120 AC Battery: Rechargable 8 volt-running
Time 5 hours at 125 ml/hr-24 hrs to recharge
KVO rate: 5ml - Rate is programmable
Flow Rate:1-999 ml/hr
weight: 14 lbs |
| |
| Baxter 6301 |
 |
Dual Pump Version Of The Baxter 6201 / Baxter Straight Line Set
Flow Rate: 1-99.9 ml/hr in 0.1 ml/hr or 1-1,999 ml/hr in 1 ml Increments
Battery 12 Volt-Running Time 6 Hrs Typical-8hrs To Reach 80% Recharge
Alerts: Stopped, Kvo, Insert Slide Clamp, New Rate, Pri Rate=0, Battery Lowsec Complete, Sec Program, Sec Rate, Sec Vtbi=0, Flow Rate, Check Vtbi, Pgm Deliv Enter Pgm, Pgm Deliv Clear All, Pmg Deliv Review Pgm, Ramp Pdp Enter Data, Ramp Pdp Rates High, Resume Pdp, Com Timeout, Ext.Comm Error
Antifree Flow Protection - Alarm Messages: Check Set Loading, Air, Occlusion, Insert Slide Clamp, Upstream Occlusion, Door Open, Battery Low, Failure, Com Timeout KVO rate: 5ml/hr - Rate is programmable Power: 120 AC |
| |
| Baxter Colleague 1 and 3 |
 |
Flow rate on each channel (primary): 0.1-99.9 mL/hr (0.1 mL increments)
1-1,200 mL/hr (1 mL increments)
Flow rate range on each pump channel: 0.1-99.9 mL/hr
(0.1 mL increments) 1-500 mL/hr (1 mL increments)
Volume to be infused: 0.1-99.9 mL/hr (0.1 mL increments)
1-9999 mL (1 mL increments)
KVO rate: 0.1-5 mL/hr (0.1 mL increments)
Configurable Sensor Settings
|
| |
| Baxter Colleague Single Channel |
 |
|
Auto Tube Loading, Configurable Performance Modes, Dose Calculator
(9 Different Delivery Modes), Label Library (64 Drug Labels |
| Abbott, Alaris and other models available | |
